Power Tiller Installation Step by Step with Video
Installing a power tiller properly ensures smooth farming operations. If you’re a farmer or a first-time user, this step-by-step guide with 8 short videos will help you set up your power tiller easily at home.
Let’s begin with Part 1 – Tyre Attachment and finish with Part 8 – Fuel & Oil Fillings.
Part 1: Starting with Tyre Attachment
Video 1:
Attach the rear wheels first. Use the axle pin and nut securely. This helps stabilize the machine while installing other parts.
Part 2: Main Handle Installation
Video 2:
Fix the central handle using the large bolts from the toolkit. Make sure it is tightened evenly for balance and control.
Part 3: Speed Control Wire Setup
Video 3:
Connect the throttle (speed control) cable to the carburettor and handle lever. Ensure it’s not too tight or too loose.
Part 4: Gear Rod Positioning
Video 4:
Install the gear rod. Remember:
-
1st Gear = Up
-
2nd Gear = Down
-
Neutral in the centre.
Part 5: Reverse & Clutch Wire Setup
Video 5:
-
Reverse Wire: Black
-
Clutch Wire: Red
Connect both to their slots on the gearbox. Pull gently to check the tension.
🔌 Part 6: Handle Switch Attachment
Video 6:
Use the provided switch (kill switch) from the toolkit. Screw it onto the handlebar for easy access.
🛡️ Part 7: Mudguard Installation
Video 7:
Attach the two small rods and use four nuts to fix both sides of the mudguard. This keeps dirt away during operation.
⛽ Part 8: Fuel & Oil Filling Guide
Video 8:
-
Petrol: 2–3 litres (pour near oil filter cap)
-
Engine Oil: 600 ml (Use 20W40 grade)
-
Gear Oil: 1800 ml (through the silver nut at the bottom)
-
Air Filter Oil: 100 ml engine oil (Clean monthly)
Note: A clean air filter extends your tiller’s life up to 5–6 years.
📌 Final Tips
-
Check oil levels every week.
-
Store the tiller in a dry shed.
-
Clean blades and filters regularly.
FAQs for Power Tiller Installation
Q1. How can I install a power tiller at home?
Ans: You can install it easily using our 8-step video guide. Each part is explained step-by-step from tyres to oil filling.
Q2. Do I need a mechanic to install the power tiller?
Ans: No, you can do it yourself by following our instructional videos. It takes 30–45 minutes.
Q3. What tools are required for tiller installation?
Ans: Most machines come with a basic toolkit including spanners, switches, and bolts required for assembly.
Q4. How do I connect the reverse and clutch wires?
Ans: The Reverse wire is black, and the clutch wire is red. Connect both to the gearbox and test the tension.
Q5. What type of engine oil is required?
Ans: Use 20W40 grade engine oil, around 600 ml for the engine and 1800 ml gear oil for the gear system.
Q6. How often should I clean the air filter?
Ans: Clean the air filter once every 30–45 days. A clean filter ensures engine life up to 5–6 years.
Q7. Can I use the power tiller for hard soil?
Ans: Yes, power tillers with 7HP engines are ideal for hard and dry soil.
Q8. How do I check if my installation is successful?
Ans: After setup, check engine start, throttle movement, and blade rotation. Watch our video for testing tips.
Q9. Is the power tiller easy to move after installation?
Ans: Yes, models with trolleys or wheels can be easily moved around the field.
Q10. Where can I buy a power tiller online in India?
Ans: Visit Behtar Zindagi to buy affordable power tillers with free shipping and a full installation guide.